shrinkage strain
基本解释
- 收缩变形；收缩应变
英汉例句
- The drying shrinkage strain develops slowly, since it is a function of the migration of the water through the hardened concrete.
干燥缩水应变发生较慢，因为它是一个水透过硬化混凝土的迁移作用。
gatefanyi.com - Throughout the drying process, the surface of the free shrinkage strain is the largest, the more close to the core layer the smaller the free shrinkage strain.
在整个干燥过程中，表层的自由干缩应变最大，越靠近芯层自由干缩应变越小。 - The rate of water evaporation, shrinkage strain and the area of cracks increase with increasing exposure temperature and wind velocity, and with decreasing relative humidity.
混凝土的水蒸发速率、收缩变形、开裂面积都随着环境温度和风速的增加而增大，随着相对湿度的升高而降低；
双语例句
词组短语
- shrinkage e strain 收缩变形
- volumetric shrinkage strain 体积收缩率
- residual shrinkage strain 残余收缩变形
- maximal shrinkage strain 最大干缩应变
- Temperature shrinkage strain 温缩应变
短语
专业释义
- 收缩应变
A coupled linear and exponential equation is finally developed from the obtained data to describe the shrinkage strain at the given initial drying density and water content.
最后,根据试验结果,提出了压实试样收缩应变与初始干密度和含水率之间的函数关系式。 - 收缩变形
For the compacted specimens,the shrinkage behavior is significantly controlled by the initial drying density and water content. In general,shrinkage strain decreases with the increase of the initial dry density and increases with the increase of the compaction water content.
对于压实试样,初始干密度和含水率对收缩特征有重要影响:初始干密度增加对体积收缩变形起抑制作用,而初始含水率的增加对体积收缩变形起促进作用。管理学
- 收缩应变